Quick Answer: Can I Use A Boat Lift For My Pontoon?

Can you put a pontoon on a boat lift?

A boat lift for a pontoon boat, depending on the style of the vessel, will require two to three sets of bunk boards, as this will allow each of the vessel’s pontoons to be completely supported when hoisted out of the water. There are several factors to keep in mind when purchasing a lift system for a pontoon boat.

What kind of lift do you need for a pontoon?

There are two main types of free standing lifts that you’ll be looking at for your pontoon: Cantilever and vertical. In short, cantilever boat lifts are good for waters with shallow banks or sandy bottoms.

Do you need a boat lift for a pontoon?

It’s important to know that not just any boat lift will do. You need one specially designed for the unique style and shape of a pontoon boat.

How much does a pontoon boat lift Cost?

Expect to pay about $6000 to $12,000 or more for a high quality, all aluminum, precision-welded ShoreMaster pontoon lift.

You might be interested:  Quick Answer: Can Yo Uattach A Lead To A Boat Mine?

How much should a boat lift Cost?

Typically, the price for a boat lift ranges from $2000 to $20000. Think of your boat lift cost as about $1500 per ton being lifted.

How do you secure a boat on a lift?

“ Tie the boat to the trailer, and then tie the boat to those anchors,” he says. Lower a fixed lift 2 feet, tie the boat as if it were in a slip, and then raise the lift to put tension on those lines. Secure the boat to the lift.

How far apart should bunks be on a boat lift?

They are currently spaced around 36″ apart at the front, and they taper to 48″+ apart where they end.

Do pontoon lift strakes work?

In short, pontoon lifting strakes provide the ability for your boat to increase speed by lifting the boat to the surface of the water. Lifting strakes will also support your boats performance in rough waters. But, I personally would only have them if they are already a pre-installed feature on the pontoon.

What is the difference between a boat lift and a pontoon lift?

Boat lifts for pontoon boats require entirely new design, structure, and weight capacity. Because the hull of a pontoon differs from traditional V-shaped boats, generic lifts aren’t constructed to support the weight distribution and width of a pontoon’s flat deck and aluminum support below.

Why do I need a boat lift?

Boat lifts move your boat out of the water, offering support and protection against wind, waves, and more. So, why do you need a boat lift? To prevent damage: When a boat is left in the water, it leads to algae growth and corrosion on the bottom. A boat lift reduces the risk of this and protects your paint job as well.

You might be interested:  Can You Get From Epcot To Hollywood Studios By Boat?

How long do aluminum boat lifts last?

Durable and Long-Lasting While you may need to replace the occasional cable or pulley, an aluminum boat lift will easily last more than 30 years.

Can I leave boat lift in water during winter?

Many people choose to leave hydraulic boat lifts in over the winter. This is possible in areas where ice flows aren’t a concern. However, it is only possible so long as you properly flush the lines to ensure there is no moisture, and verify that the hydraulic fluid is formulated for winter weather conditions.

Leave a Reply

Your email address will not be published. Required fields are marked *