- 1 Can you convert a car engine to a marine engine?
- 2 What is the difference between a marine motor and a truck motor?
- 3 Can you use a truck engine in a boat?
- 4 What engine do I need for my boat?
- 5 How does a Marinized engine work?
- 6 Where is the engine on a boat?
- 7 Do marine engines run backwards?
- 8 Can you use a marine carburetor on a car?
- 9 What is the problem with using your boat’s engine to drive it onto a trailer?
- 10 Is Marine Diesel different from car diesel?
- 11 How does a keel cooler work?
- 12 How much horsepower does a 16 foot boat need?
- 13 What is the biggest motor you can put on a 12 foot boat?
Can you convert a car engine to a marine engine?
Chevrolet engines can be converted for marine use with a few simple modifications. Gasoline engines can provide strong, reliable power for boat propulsion. Parts are easy to get from auto parts dealers and can be much lower in price than marine-specific parts from a marine supply business.
What is the difference between a marine motor and a truck motor?
An automotive engine kicks down to a lower rpm at top speeds. In contrast, a marine engine’s sustained speed only increases with sustained rpm. Basically, a truck motor has four to six gears, and a marine motor has one. It only makes matters worse when a boat engine isn’t properly broken in.
Can you use a truck engine in a boat?
Answer: In principle, a diesel engine is a diesel engine, so an automotive diesel will work fine in a boat. And, in fact, many marine diesel engines are nothing more than “marinized” car or truck engines. The engine will want a water-cooled exhaust manifold and a wet exhaust (a dry exhaust is too noisy).
What engine do I need for my boat?
The rule of thumb is based on weight alone, and says you should have between 40 and 25 pounds of weight for each horsepower. For example, a 5,000-pound boat could have an engine with between 125 and 200 horsepower.
How does a Marinized engine work?
engine are as follows: Suction stroke for taking the fresh air inside the chamber – which is the downward movement of the piston. Compression stroke to compress the air-fuel mixture – which is an upward movement of the piston. Power stroke – in which the explosion takes place and the piston is pushed downwards.
Where is the engine on a boat?
Outboard engines are mounted on the transom of the boat, outside of the boat’s hull, which is why they’re called “outboards”. Outboard engines are used to both power and steer the boat. To steer an outboard you need to move the entire engine.
Do marine engines run backwards?
Usually marine engines are only reverse rotation if it has a mate. 2/6/12 12:46 a.m. the reverse rotation engines can be made into standard rotation by putting in a regular timing set in place of the gear drive.
Can you use a marine carburetor on a car?
The Marine carb will work just fine. It has some safety related features, such as the bowl vents, and a provision for a “puke” tube from the fuel pump, but otherwise is basically the same as a “car” carburetor.
What is the problem with using your boat’s engine to drive it onto a trailer?
NOTE – While many people drive the boat onto the trailer, it isn’t advised. Using the engine to assist trailering erodes the ramp bed, can lead to debris being sucked into the engine, and can cause an accident! Make sure you drain all water from the boat – the bilge, the live well, the trailer lights, etc.
Is Marine Diesel different from car diesel?
Marine diesel oil (MDO) is also composed differently than regular diesel fuel. Unlike the diesel you fuel your car with, MDO contains some heavy fuel oil.
How does a keel cooler work?
A keel cooler is a closed circuit cooling system mounted externally on the vessel’s hull below the waterline. Engine coolant is circulated through the keel cooler, which transfers heat from the coolant before it returns to the engine.
How much horsepower does a 16 foot boat need?
It can have a range of 50-300 horsepower motors for maximal efficiency. This range already considers the boat’s size and usage. For a standard 16-foot aluminum boat, a 60 horsepower motor will suffice. On average, it can have a speed of about 25-30 miles per hour.
What is the biggest motor you can put on a 12 foot boat?
For example, a twelve-foot boat with a four-foot transom width translates into a maximum engine size of fifteen horsepower.