- 1 Are jet boats any good?
- 2 How does reverse work on jet boat?
- 3 Do jet boats have gears?
- 4 Can you take a jet boat in the ocean?
- 5 Are jet boats hard to maintain?
- 6 How long do jet boat engines last?
- 7 Can a Yamaha jet boat go in reverse?
- 8 How do jet boats work?
- 9 Do boats change gears?
- 10 Why do boats not use transmissions?
- 11 What is a clutch dog on an outboard motor?
- 12 Is salt water bad for jet boats?
- 13 Why did Seadoo stop making jet boats?
- 14 Can a Yamaha jet boat go in the ocean?
Are jet boats any good?
As mentioned above, they’re great in shallow waters, but inboard jets can also be backed up on to beaches given the absence of any protruding parts including rudders. At very high speeds jet drives have been documented as being more efficient than props, and they’re certainly quicker to accelerate.
How does reverse work on jet boat?
As stated before, jet boats do have reverse. What controls reverse is a bucket in the rear that directs the water in the opposite direction so you can go in reverse. And neutral is a spot between forward and neutral, they cancel each other out.
Do jet boats have gears?
Boat engines do not have gears because they have a reduction gear, and do not have the need for a transmission or gearbox like our cars do in order to increase in speed. Boats depend on their propellers and engine horsepower for speed. The propeller on a boat does not turn at the same speed as the engine.
Can you take a jet boat in the ocean?
Jet boats can work in saltwater, but it comes with drawbacks. For one, they are not equipped with the right gear to handle saltwater, so you may experience slower speeds or more resistance in steering. In addition, without proper maintenance after a saltwater trip, they may see long-term damage.
Are jet boats hard to maintain?
Costs of Maintaining a Jet Boat Jet boats are usually expensive to buy and can also be somewhat expensive to maintain. Jetboat engines aren’t like”regular” combustion engines, which means that they need specialists to take care of them.
How long do jet boat engines last?
The average marine gasoline engine runs for 1,500 hours before needing a major overhaul. The average marine diesel engine will run for more than three times that long and log an average 5,000 hours under the same conditions.
Can a Yamaha jet boat go in reverse?
Unlike a prop boat, there is no gear gnashing going in and out of reverse on a jetboats, so you can shift back and forth as frequently as needed (also was true in your SeaDoo, of course). Some of the newer Yamaha boats have some electronic speed control options that mine does not, so owners of newer boats can chime in.
How do jet boats work?
Jet-powered boats use the same propulsion system used in personal watercrafts (PWCs) that mates an inboard engine to a jet pump. The pump draws water from an intake in the bottom of the boat and shoots a high-velocity stream of water from a nozzle at the back of the boat to propel it forward.
Do boats change gears?
Watercraft don’t cycle through gears, making the term something of a misnomer. You’ll often hear the phrase, marine gear, to describe it more accurately, instead. An automotive transmission balances the RPMs of the wheels and engine. In a power boat, the propellor takes on the task of switching gears, seamlessly.
Why do boats not use transmissions?
Have boats not got gears because the medium of water has traditionally allowed designers to get away without having them (you can still get going from standstill due to prop slipping, but prop of planing boat is designed to work most efficiently at point where engine is producing max power, so until it’s got to max
What is a clutch dog on an outboard motor?
The clutch dog is basically the connection between your driveshaft on the motor and the propshaft. It sits between your forward and reverse gear. It has a groove in the center of it that the shift fork rides on. Its also connected to the prop shaft with splines. It slides on the propshaft.
Is salt water bad for jet boats?
Saltwater is not good for jet boats (jet skis, boats, and PWCs as well) because it damages the boat’s metal parts by forming rust on the surface of the metal. Saltwater corrodes the metal 5 times faster than freshwater. So, proper maintenance is essential for a jet boat if you are boating in saltwater.
Why did Seadoo stop making jet boats?
Why Did Sea-Doo Stop Making Boats? Sea-Doo stopped manufacturing boats because of the poor sales results due to the financial crisis. According to the company, the sales decline started in 2007, so finally on September 14, 2012, Sea-Doo announced that it will stop making jet boats.
Can a Yamaha jet boat go in the ocean?
Yamaha’s jet- drive bowriders aren’t known as ocean boats. You tend to see them on lakes, pulling tubers and anchored at party coves. That’s not dangerous, but it might be enough to make you decide not to go fishing, based on the dearth of other boats.