- 1 What color is VC 17?
- 2 What should I paint the bottom of my boat with?
- 3 Can you bottom paint a boat on a trailer?
- 4 How long does VC 17 last?
- 5 How much VC 17 do I need?
- 6 What is the best paint for fiberglass boats?
- 7 Does bottom paint slow a boat down?
- 8 How long can a boat sit in the water without bottom paint?
- 9 Can you paint over paint on a boat?
- 10 How much does it cost to bottom paint a boat?
- 11 How do I remove VC 17 bottom paint?
- 12 What is VC 17m?
- 13 How long does vc17 take to dry?
What color is VC 17?
VC17 Original will dry a bright copper color until until it is launched. After being inthe water for a few weeks it will begin changing to a bronze/charcoal color. If you apply paint above the water line it will remain copper colored. Spraying it with water frequently will help change it to match the bottom faster.
Vinyl-based paints are slick, hard paints that can be burnished to provide a smooth surface preferred by owners of performance boats. Unlike thin-film paints, vinyl paints like VC Offshore can be used in salt-water, although their antifouling effectiveness is inferior to high-quality modified epoxies and ablatives.
You should not use a hard paint if you boat comes out of the water such as on a trailer or a lift. After 72 hours, the hard bottom paint will oxidize on the outer surface from the air and becomes ineffective. If you are trailering your boat, or keep it on a lift you should always use ablative bottom paint.
How long does VC 17 last?
Some folks repainted last fall so their vc 17 has been on for about 6 mos. some folks only apply vc 17 every three yrs on the theory that the copper is still there when they lightly abrade their hull.
How much VC 17 do I need?
VC-17 (actually VC-17m with Biolux) comes in 0.75 Quart cans for around $50 per can. You cannot buy it in gallon quantities. I have found that one can will cover about 100 sq ft as a seasonal repaint, per coat (Interlux estimates 340 sq ft per gallon, so its at least in the ballpark).
What is the best paint for fiberglass boats?
The best paints available, in terms of durability and gloss retention, are the two-part polyurethane type paints. These paints are very thin, requiring multiple coats. However, they chemically harden to a very durable finish that will last for many years.
Three: your boat could be slowing down There’s some debate about this but the consensus is, yes, bottom paint can slow your boat down. If your hull has a nice slick paint job then you may not notice much effect. You’ll end up with drag and your boat will slow down and use more fuel.
I have kept it in the water for about five or six days with no ill effects. I have seen other boats, without bottom paint, tolerate two weeks of immersion without any ill effects.
Can you paint over paint on a boat?
If you’re applying over old bottom paint, you can skip the de-waxing process and simply sand or power wash away any old or loose paint. Also, you won’t need to roll and tip; most people skip the tip part of this equation since the bottom will be underwater anyway, and simply roll the paint right on.
On average, hiring a professional company to bottom paint your boat will cost between $1000 and $3000 or more.
A: You cannot put any paint over VC 17 except more VC 17. Fortunately, it is a fairly easy paint to remove. What remains after a vigorous power wash can usually be removed with acetone, xylene or even denatured alcohol and a bag of rags. (You will need both skin and lung protection if you use these solvents.)
What is VC 17m?
VC 17m is a high-performance, friction-reducing antifouling formulated with fluoro-microadditive to produce a super-smooth racing finish. The coating is up to eight times thinner than traditional paint, reducing weight and drag surface, while virtually eliminating paint build-up.
How long does vc17 take to dry?
In 50 deg weather – it dries in about 2 minutes. In 80 degree weather – just seconds. In hot weather, you can literally see the paint dry on the hull as you apply it. That also means that the paint is quickly drying in the pan too.